Craig-Type Extractor Set – Slap Hammer
Designed to firmly tighten circumferentially around a wire, pin, broken screw, etc. for removal — especially helpful for the removal of threaded pins
A component of the Craig-Type Extractor Set.
Removes pins & screws up to 5 mm (.2″) diameter and wires as small as .8 mm (1/32″) diameter Two cross-handle insert rods give strong leverage for locking the collet securely onto the pin Five interchangeable collets for various grasping capacities Slap hammer included
Product Number(s)
1215-SH
Dimensions
Overall Length (unfolded): 15.25″ (38,8 cm)
Dimensions Triangle Folded: 4″ x 4.25″ (10,2 x 10,8 cm)
Accuracy Statement for devices with a measuring function: Devices with a measuring function are considered non-critical, non-calibrated, and are intended for reference-only measurements. While it provides a helpful visual guide for relative measurements, it is not calibrated to specific precision standards. Measurements taken with this device should not be considered accurate enough for critical applications requiring strict dimensional tolerances. General manufacturing tolerances of +\- 1% at each graduation, or 2% of the full scale apply, but no conformance qualifications are provided or implied.