Tibia AccuAngle
Designed to be placed on the tibia cutting block to check if the cut is level
Magnetic base helps to hold the AccuAngle in place on a cutting block. May also be used on top of the tibia after cut has been made. A pin may be inserted in the holes to provide a visual reference of the cut’s slope.
Product Number(s)
1145
Dimensions
Dimensions: 3″ x 2″ (5,1 cm x 7,6 cm)
Reference Measurement Statement (Non-Measuring Function)
This device is not intended to provide quantitative measurements and does not incorporate a measuring function as defined under Regulation (EU) 2017/745 (MDR).
Any scales, markings, or visual indicators present on the device are provided solely for reference and orientation purposes to support general use. These indicators are not calibrated against traceable standards and have not been validated for accuracy, precision, or repeatability.
Accordingly, values derived from these markings shall be considered approximate only and must not be used where accurate or traceable measurements are required for clinical decision-making, diagnosis, or other applications requiring defined metrological performance.
Users shall rely only on devices specifically intended and validated for measurement when quantitative accuracy is required.